Search results

This study aims to understand the multiaxial fretting fatigue, wear and fracture characteristics of 35CrMoA steel under the elliptical loading path.

By keeping the contact pressure and torsional shear cyclic stress amplitude unchanged; the axial cyclic stress amplitude varied from 650 MPa to 850 MPa. The fretting fatigue test was carried out on MTS809 testing machine, and the axial cyclic strain response and fatigue life of the material were analyzed. The fretting zone and fracture surface morphology were observed by scanning electron microscope. The composition of wear debris was detected by energy dispersive X-ray spectrometer.

In this study, with the increase of axial stress amplitude, 35CrMoA steel will be continuously softened, and the cyclic softening degree increases. The fretting fatigue life decreases unevenly. The fretting scars in the stick region are elongated in the axial direction. The area of fracture crack propagation zone decreases. In addition, the results indicate that wear debris in the slip region is spherical and has higher oxygen content.

There were few literatures about the multiaxial fretting fatigue behavior of 35CrMoA steel, and most scholars focused on the contact pressure. This paper reveals the effect of axial cyclic stress on fretting fatigue and wear of 35CrMoA steel under the elliptical loading path.

The purpose of this paper is to understand the effect of particle content, applied load and sliding speed on the tribological properties of A356-SiCP composites manufactured using a newly developed vacuum stir casting technique.

A356 alloy reinforced with 10, 15 and 20 vol% SiC particles was prepared by vacuum stir casting. Tribological tests were carried out on block-on-ring tribometer under dry sliding conditions, room temperature. Wear mechanism was investigated by scanning electron microscope and energy dispersion spectrum.

SiCP is homogeneously dispersed in the matrix. The increase in SiCP content decrease wear rate, but it leads to an increase in coefficient of friction. The wear rate increase and friction coefficient present different variation trends with increasing load. For A356-20%SiCP composite, when the load is less than 10 MPa, wear rate and friction coefficient under sliding speed of 400 rpm are lower than those of 200 rpm. Wear mechanism transition from abrasion, oxidation, delamination, adhesion to plastic flow as load and sliding speed increasing.

Results of this study will help guide the use of A356-SiCP in many automotive products such as brake rotors, brake pads, brake drums and pistons.

There are few paper studies the effect of particle content, applied load and sliding speed on the tribological properties of A356-SiCP composites. Aluminum matrix composites with uniform distribution of reinforcing particles were successfully prepared by using the newly developed vacuum stir casting technique.

An integrated intuitionistic fuzzy (IF) modelling-based framework for examining the performance analysis of a packaging unit (PU) in three different stages has been proposed.

For the series and parallel configuration of PU, a mathematical model based on the intuitionistic fuzzy Lambda–Tau (IFLT) approach was developed in order to calculate various reliability parameters at various spreads. For determining membership and non-membership function-based reliability parameters for the top event, AND/OR gate transitions expression was employed.

For 15%–30% spread, unit’s availability for the membership function falls by 0.006442%, and it falls even more by 0.014907% with an increase in spread from 30% to 45%. In contrast, for 15%–30% spread, the availability of non-membership function-based systems reduces by 0.007491% and further diminishes. Risk analysis has presented applying an emerging approach called intuitionistic fuzzy failure mode and effect analysis (IFFMEA). For each of the stated failure causes, the output values of the intuitionistic fuzzy hybrid weighted Euclidean distance (IFHWED)-based IFFMEA have been tabulated. Failure causes like HP1, MT6, FB9, EL16, DR23, GR27, categorized under subsystems, namely hopper, motor, fluidized bed dryer, distributor, grader and bin, respectively, with corresponding IFFMEA output scores 1.0975, 1.0190, 0.8543, 1.0228, 0.9026, 1.0021, were the most critical one to contribute in the system’s failure.

The limitation of the proposed framework lies in the fact that the results obtained for both reliability and risk aspects mainly depend on the correctness of raw data provided by the experts. Also, an approximate model of PU is obtained from plant experts to carry performance analysis, and hence more attention is required in constructing the model. Under IFLT, reliability parameters of PU have been calculated at various spreads to study and analyse the failure behaviour of the unit for both membership and non-membership function in the IFS of [0.6,0.8]. For both membership- and non-membership-based results, availability of the considered system shows decreasing trend. To improve the performance of the considered system, risk assessment was carried using IFFMEA technique, ranking all the critical failure causes against IFHWED score value, on which more attention should be paid so as to avoid sudden failure of unit.

The livelihood of millions of farmers and workers depends on sugar industries. So perpetual running of these industries is very important from this viewpoint. On the basis of findings of reliability parameters, the maintenance manager could frame a correct maintenance policy for long-run availability of the sugar mills. This long-run availability will generate revenue, which, in turn, will ensure the livelihood of the farmers.

Mathematical modelling of the considered unit has been done applying basic expressions of AND/OR gate. IFTOPSIS approach has been implemented for ranking result comparison obtained under IFFMEA approach. Eventually, sensitivity analysis was also presented to demonstrate the stability of ranking of failure causes of PU.

The COVID-19 pandemic has significantly raised economic risk and uncertainty worldwide. How does COVID-19 affect urban housing markets? Is there any difference when different areas encounter COVID-19? This study aims to investigate the impacts of the pandemic on housing prices by using Beijing’s housing markets data in 2020.

The authors use transaction-level data from April to September in 2020 to conduct a hedonic price analysis of the housing markets in Beijing. The data included 70,843 transactions scraped from a real estate agent’s website. The authors use the difference-in-differences approach to evaluate the impacts of the COVID-19 outbreak from the Beijing Xinfadi market (the largest and most important food wholesale market in Beijing) in 2020.

This outbreak of COVID-19 caused a 6.3% drop in housing prices in Beijing from April to September in 2020. However, the impacts of COVID-19 on housing prices in different urban neighbourhoods were spatially heterogeneous. Housing prices in neighbourhoods with industries that rely on face-to-face communication were more affected by the pandemic, while those that can work remotely were less affected.

By investigating the impacts of COVID-19 on housing prices in Beijing, this study illustrates that urban housing prices would be impacted by the pandemic, at least in the short term. While the rise and fall of housing prices were found spatially heterogeneous in Beijing, it suggests that urban neighbourhoods with specific socioeconomic characteristics and geographic locations would unfold different resilience when encountering pandemic. By using data scraping and rigorous statistical tools, the study is probably one of the first ones examining the consequences of COVID-19 in intra-urban housing markets.

Presents over sixty abstracts summarising the 1999 Employment Research Unit annual conference held at the University of Cardiff. Explores the multiple impacts of globalization on work and employment in contemporary organizations. Covers the human resource management implications of organizational responses to globalization. Examines the theoretical, methodological, empirical and comparative issues pertaining to competitiveness and the management of human resources, the impact of organisational strategies and international production on the workplace, the organization of labour markets, human resource development, cultural change in organisations, trade union responses, and trans‐national corporations. Cites many case studies showing how globalization has brought a lot of opportunities together with much change both to the employee and the employer. Considers the threats to existing cultures, structures and systems.

Health Management and Leadership, Marketing Social Causes, Strategy, International Business.

Post-graduates, Practitioners.

General Electric has been operating in the Middle East, North Africa (MENA) region for over a century. GE is committed to corporate citizenship having launched ecomagination in 2005 and healthymagination in 2009. For sustainability, GE believes that both innovation and localization are critical. This case deals with contextualization of breast cancer campaign for the Kingdom of Saudi Arabia through healthymagination. Rania Rostom, Communications Director, Middle East, North Africa and Turkey region, GE, reviews the campaign implemented and looks at roll-out across the MENA region. The situation is unique, as breast cancer strikes women in the region ten years earlier than the West, and the cultural context does not allow the discussion of the topic in public. One of the peculiarities of this region was the high penetration of social media and its large adoption rate by the young. GE used a unique Facebook campaign to drive awareness on the topic, encourage screening appointments, seek treatment and reduce the discomfort associated with the process.

On completion of utilizing the case study as an exercise, students should be able to gain case-specific skills – critically examine the importance of the consumer behavior, health marketing, marketing strategy and aspects of international business in the Middle East, KSA, in particular, and demonstrate this by analyzing real regional/world examples using complex theoretical frameworks; identify examples of best practice and explain the dynamics toward consumer behavior, health marketing, marketing strategy, international business with reference to a range of theoretical models and apply these in a meaningful way to the MENA region – discipline-specific skills – synthesize and critically evaluate a corpus of academic literature and government reports on consumer behavior, health marketing, marketing strategy, international business – and personal and key skills – reflect on the process of learning and undertake independent/self-directed learning (including time management) to achieve consistent, proficient and sustained attainment; work as a participant or leader of a group and contribute effectively to the achievement of objectives in the field of consumer behavior, health marketing, marketing strategy, international business.

Teaching Notes are available for educators only. Please contact your library to gain login details or email support@emeraldinsight.com to request teaching notes.

The application of business process methods in the domain of disaster response management (DRM) is seen as promising approach due to the similarity of business processes and disaster response processes at the general structure and goals. But up to now only a few approaches were able to handle the special characteristics of the DRM domain. Thus, the purpose of this paper is to identify the existing approaches and analyze them for the discussion of general requirements for applying methods and tools from business process management to DRM.

A structured literature review covering a wide field of information system-related publications (conferences and journals) is used to identify and classify general requirements discussed as the state of the art.

The work in this paper resulted in a suitable classification of requirements for the development of process-oriented DRM approaches deduced from the existing work. This was used to outline and analyze the current research landscape of this topic and identify research gaps as well as existing limitations.

Although the review of the state of the art is based on a wide set of publication databases, there may exist relevant research papers which have not been taken into consideration.

The elaborated requirements provide value for both the research community and practitioners. They can be considered to develop new or improve existing DRM systems and, thus, to exploit the potentials of process-oriented IT in supporting DRM in the case of disaster.

In this farm‐to‐fork trial, genetically engineered (GE) Bt sweet‐corn and Bt potatoes were grown side‐by‐side with conventional varieties in the 2000 growing season at a farm and market in Hillsburgh, Ontario, Canada. The Bt sweet‐corn required no insecticides. From an economic perspective, only the first planting had pest pressure high enough to warrant the higher seed cost of the GE variety. The sweet‐corn harvested throughout the trial was segregated and labeled, and direct consumer evaluation of purchasing preferences was conducted. Overall, the Bt sweet‐corn outsold the conventional sweet‐corn by a margin of 680 dozen (or 8,160 cobs) to 452.5 dozen (or 5,430 cobs). A limited number of intercept interviews were conducted after consumers made their purchasing decision. The majority of consumers interviewed said they were more concerned about pesticides than genetic engineering; however, taste and quality also had a strong influence on purchasing decisions.

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the marketing strategies employed, together with the organizational structures used and looks at the universal concepts that can be applied to any product. Uses anecdotal evidence to formulate a number of theories which can be used to compare your company with the best in the world. Presents initial survival strategies and then looks at ways companies can broaden their boundaries through manipulation and choice. Covers a huge variety of case studies and examples together with a substantial question and answer section.

This study aims to explore the role of the green market (GM) and green innovation (GI) towards green entrepreneurship (GE) and sustainable development (SD).

Based on cross-sectional data, the researchers used quantitative methods in this study to confirm the conceptual framework. The researchers used a questionnaire to collect the data obtained from Pakistan's knowledge-based companies (KBCs). In total, the researchers used 192 usable samples to deliver the findings.

The researchers used structural equation modeling (SEM) to ensure the model's fitness and as a basis for this study's hypotheses. The findings highlight that the GM factors, such as green product (GP), green design (GD), green supply chain (GSC) and green production (GPN) have a positive and significant effect GM factors, such as on both GE and SD. Further, GI is, also, a significant predictor of GE and SD. Finally, this study's findings show that GE has a predictive role of towards SD.

This study's findings create a source of attention for individuals to preserve the GM's natural resources. Further, mainly in developing contexts like Pakistan, the addition of the GI factor and the GM towards GE and SD contribute to the depth of the existing literature.

By integrating factors, such as innovation toward GE and SD, this study's findings provide an original contribution to the empirical evidence.